Create your own flow system by using solder ring fittings with pre-installed solder.

•  Pre-soldered fitting for a professional finish
•  Integral Solder Ring - No additional solder required
•  Requires a blowtorch to seal the pre installed solder within the fitting
•  For use on hot and cold water systems
•  WRAS approved

Made in accordance with British Standard BS EN1254-1: 1998. 

Create your own flow system by using solder ring fittings with pre-installed solder.

•  Pre-soldered fitting for a professional finish
•  Integral Solder Ring - No additional solder required
•  Requires a blowtorch to seal the pre installed solder within the fitting
•  For use on hot and cold water systems
•  WRAS approved

Made in accordance with British Standard BS EN1254-1: 1998. 

Warranty:All new parts come with manufacturers warranty. If the product is found faulty within 28 days of purchase it can be returned to Adlink UK Limited for replacement or refund, you can contact us via the Contact Us page or telephone +44 208 991 5025. (Please note that if the item requires testing your refund will take approximately 14 days from receipt at Adlink UK Limited. 

Adlink UK Returns Policy: All returns must be requested in writing. All returns must be accompanied by proof of purchase. Products returned will be tested before a refund or replacement is sent, this may take up to 14 days. Return carriage will not be paid unless agreed beforehand. Products will not be covered if misused or not serviced as per maintenance instructions.